|
The EZ-Go® is a high power outdoor 250mW wireless Client Bridge / Router system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 15 Mb/sec.
It complies with the 802.11b/g standards to insure interoperability.
The EZ-Go® is housed in a UV resistant and UL rated weatherproof enclosure with a nice aesthetic appearance and clean lines. It includes an integrated 14dBi high efficiency antenna for extended range.
With its advanced software, the EZ-Go® supports multiple operating modes, including: Client Bridge, Client Router, Access Point Router, Access Point + WDS and Point to Point.
The EZ-Go® comes complete with Cat5e rated POE (Power Over Ethernet) power inserter and 18VDC auto-ranging power supply.
The corrosion resistant bracket system accommodates pole or wall mounting.
The unit supports an optional external antenna connector.
| IEEE 802.11b/g |
Operational Modes |
|
| 802.11b/g 54Mbps Device |
Bridge |
| 64/128 bit WEP |
Router |
| Disable SSID broadcasts |
Functionality Modes |
| MAC based access control |
Access Point |
| IEEE 802.1x |
Access Point Client |
| EAP, PEAP, WPA, WPA2 |
Wireless Distribution System |
| WDS (up to 6 bridges) |
WDS + Access Point |
| Antenna Alignment Utility |
Universal Repeater |
| Transmit power control |
DHCP Server |
| Wireless client isolation |
Static DHCP mappings |
| Wireless client status |
DHCP mappings Listing |
| Management |
Firmware Upgrade |
| Web Interface |
Web Interface |
| Discovery Tool |
Discovery Tool |
| SNMP |
Power Over Ethernet |
| SSH |
Power Supply up to 18v |
| Telnet |
Passive PoE |
| Configuration |
Watchdog timer |
| Backup / Restore |
Hardware |
| Configuration reset |
Software |
| Package Contents: |
|---|
| 1 x EZ-Go-2 unit
|
| 1 x Mounting bracket
|
| 1 x PoE Injector
|
| 1 x 18v 0.8A Power Supply |
|
